Maintenance Guide For Face Mask Packing Machine

Explanation of the working principle of the face mask packing machine

The face mask packing machine mainly uses the principle of juice centrifugation to inject the hydrated nutrients in the pulp into the fruit film making container, and completely seals the medium and high temperature centrifugal isolation technology, as well as the micro-dot cycle nanotechnology to ensure that it remains at medium and high temperatures. It can ensure that the molecular structure of collagen and the molecular structure of fruits and vegetables are not changed, and effectively fuse the collagen component in the collagen active peptide with the active ingredient in fruits and vegetables to form a new collagen molecular structure. Thus, it is synthesized into a perfect fruit film liquid, and through the process of injecting the fruit film tray and cooling, it forms the pure natural fruit and vegetable mask that we dream of. And Yiran retains the natural aroma of fruits and vegetables. This provides our skin with a highly absorbent and airtight mask. Its high water absorption capacity can lock moisture in the skin, which is dozens of times that of traditional collagen masks. And its tightness prevents moisture from evaporating and allows nutrients to penetrate into the skin to achieve instant repair and nourishment effects.

The role of face mask packing machine and daily maintenance

The mask packaging machine is a machine for packaging products, which plays a protective and beautiful role.

The mask packaging machine is mainly divided into 2 aspects: 1. The assembly line production and packaging. 2. Product peripheral packaging equipment.

The mask packaging machine has advanced design, reasonable structure and reliable performance. The mask packaging machine adopts double-synchronous belt pulling film, which is controlled by the cylinder to tension, automatic deviation correction and automatic alarm protection function to minimize the loss. The measuring device is matched, which integrates bag making, filling, filling, printing and counting. The opening and closing measuring device can be modified according to the material.

Several key points of mask packaging machine maintenance: cleaning, tightening, adjusting, lubricating, and antiseptic. In the normal production process, each machine maintenance staff should do according to the maintenance manual and maintenance regulations of the machine packaging equipment, strictly perform various maintenance work within the prescribed cycle, reduce the wear rate of parts, eliminate the hidden danger of failure, and prolong The service life of the machine. Maintenance is divided into: routine maintenance, regular maintenance (points: first-level maintenance, second-level maintenance, third-level maintenance), special maintenance (points: seasonal change maintenance, decommissioning maintenance).

Matters needing attention in daily care and maintenance of the face mask packing machine

(1) The face mask packing machine should be operated on a dry, clean and sturdy horizontal tabletop, and at least 10cm away from the table.

(2) Before using the power supply of the mask machine as 220V (mains power), please check whether the voltage marked on the product matches the local voltage.

(3) Children are strictly prohibited from touching the machine without adult supervision.

(4) When the mask machine is not in use for a long time, please unplug the power cord from the power outlet to avoid adverse effects caused by misoperation.

(5) When moving the mask machine, try to translate the machine forward as far as possible, do not stand upside down, so as to avoid the remaining water in the machine from scalding and scalding the human body.

(6) When cleaning the machine, do not directly rinse or soak the machine.

(7) The face mask packing machine has not been used for a long time. When using it again, please wash the inside of the machine thoroughly with hot water before using it.

(8) If the machine has a quality problem that you cannot solve, please contact customer service or go to the designated service station for repair and handling. Do not disassemble the machine for maintenance to avoid the risk of leakage or electric shock.

(9) Please do not move the body during the operation of the machine, and do not disassemble or assemble the components during the operation.

(10) Do not subject this product to severe impacts or drops.

(11) Do not cover the heat dissipation holes during film formation.

(12) When disassembling the machine for cleaning or maintenance, please unplug the power cord from the power outlet first.

(13) During the operation of the machine, do not put hands or other hard objects into the machine body, and ensure that the machine is placed on a level surface.

(14) When installing the machine after cleaning or maintenance, be sure to install the mixing box, residue box, filter, protective cover, mask tray and cleaning plate in place, and fasten the upper cover and pressure bar.

(15) During film formation, please do not touch the emergency switch on the side of the mask tray. The film tray will pop up automatically after filming is completed, no manual work is required. This switch is used for malfunction or maintenance, when you need to open the mask tray manually.

(16) If the power is suddenly cut off after pressing the start button, after turning on the power, add pure water to the water injection port until the indicator light turns red and stop adding water, and press the start button, the machine will restart the heating film-making process . It is not recommended to use this mask if the power is off for too long.